?

Log in

No account? Create an account
entries friends calendar profile Previous Previous Next Next
How I unbricked CMU in my Mazda - Царапающий лбом скрижали времён — LiveJournal
Mostly Harmless
yms
yms
How I unbricked CMU in my Mazda
57 comments or Leave a comment
Comments
yms From: yms Date: March 24th, 2018 05:56 am (UTC) (Link)

Re: password

I mean "ONE byte at 0x10000". The rest of the bytes should remain FF. But I didn't try actually to set it to 00.
By "I flashed the chip" I mean "I filled the chip memory using the programmer device, clicking the Write (or Program) button in the software".
From: (Anonymous) Date: March 24th, 2018 12:17 pm (UTC) (Link)

Re: password

ı did it. :) really thx. my system working now. you are right it dont necessary to change ff to 00 at 0x10000. just ı change bootstrap partion with failsafe bootstrap e0000000002.dat. I check that failsafe and ıbc2 same with firmware and didnt change anything.

I understand that e0000000001.dat for update mode e0000000002.dat for normal mode at bootstrap partion.

anyway. I saved my system and so my Money :) thank you again for advices.
yms From: yms Date: March 24th, 2018 04:32 pm (UTC) (Link)

Re: password

you're welcome :)

Edited at 2018-04-16 08:31 pm (UTC)
From: Maco Meza Date: April 13th, 2019 07:40 am (UTC) (Link)

Re: password

How did you change your bootstrap partition? Could you provide detailed steps? Including editors / tools / videos ? Thanks
57 comments or Leave a comment